WS2815 breakpoint transmission pixel addressable digital LED strip

Description:
WS2815 LED strip is an intelligent 3-channel addressable strip product that integrates control circuit and light-emitting circuit. It has built-in IC, each LED is a pixel, and each pixel contains MCU intelligent digital interface, latch and shaping amplifier circuit, etc., to ensure the high consistency of pixel color. Through zero-return code communication, the transmission distance between any two points can exceed 5 meters without signal amplification circuit. It has 256 levels of grayscale and can achieve full true color display of 16777216 colors. The scanning frequency is not less than 2KHZ/s. The serial interface design completes data reception and decoding through a signal line. It has a unique breakpoint continuous transmission function to realize dual-channel signal transmission. When a single pixel is damaged, the signal transmission is not affected. The unique 12V power supply voltage effectively reduces the working current of the pixel, reduces the circuit board voltage drop, and ensures the uniformity of pixel mixing at a longer distance. Compared with the ws2812 product, it has a breakpoint continuous transmission function, and compared with the ws2813 product, it has a changed voltage, which can effectively avoid a certain voltage drop

The WS2815 products of Easton Technology Co., Ltd. include 30leds/m, 60leds/m, , 96leds/m, 120 leds/m and 144leds/m. These products provide multiple protection levels such as IP20/IP65/IP67/IP68, suitable for different application scenarios. Easton Technology can also provide related accessories such as power supply, controller, aluminum profile, etc. In addition, Easton Technology also provides customized services, including wire length, PCB width, special-shaped specifications, LED quantity, connector specifications, logo, packaging, LED light strip length, etc.

Specifications:

Note:
WS2815 must be controlled with a DC12V power supply and LED controller!
GS8208/SK6813P IC has the same functions, and they are all branded products with relatively stable functions!
There are solder joints every 0.5 meters, please pay attention!
Main features:
One pixel damage will not affect the operation of other LEDs, dual signal line version, signal can jump
PCB color:
White: white PCB; black: black PCB
Protection level:
(1) IP20 --- not waterproof, indoor use
(2) IP65 --- silicone coating, easy to cut, outdoor use
(3) IP67 --- silicone tube, needs to be resealed after cutting, outdoor use
(4) IP68 --- waterproof by glue filling, can work underwater
Product parameters:
(1) Working voltage: DC12V
(2) LED light source: SMD 5050 RGB (same as WS2812 protocol, but uses dual signal lines, so it can be controlled by the same WS2811/ws2812 controller)
(3) LED chip: Jingyuan or Sanan
(4) LED quantity: 30/60/96/120/144LED/meter
(5) IC quantity: 30/60/96/120/144LED/m
(6) Power: 9/18/28.8/36/43.2W/m
(7) Grayscale: 256 levels/color
(8) Cutability: 1 LED/cut (built-in IC, 1 IC controls 1 LED)
(9) Beam angle: 120°
(10) Color mode: 133 patterns and 100 speeds
(11) Dimensions: 5000mm x 10mm x 2.4mm (30/60/96LEDS/M) or 1000mm x 12mm x 2.4mm (120/144LE
(12) Packaging: 5m/roll or 1m/roll 12v ws2815 RGB light strip + 4-pin connector
(13) Warranty: 2-3
Features:
(1) Flexible PCB (IP20, IP65) with 3M tape on the back for easy installation.
(2) Energy saving and environmental protection.
(3) High brightness 5050 SMD LED strip.
(4) Solid state, strong resistance to shock or vibration.
(5) Low power consumption, high brightness.
(6) Matching RGB controller and power supply system.
(7) Wide viewing angle.
(8) RGB color.

More features:
1. Damage to one pixel will not affect the operation of other LEDs.
2. DC12V voltage input, better solves the problem of voltage drop.
3. Dual signal line version, signal can jump transmission.
4. Built-in signal shaping circuit, any pixel receives the signal and then outputs it after waveform shaping, ensuring that line waveform distortion will not accumulate.
5. The transmission distance between any two points is within 5 meters, without any additional signal amplification circuit.
6. When the refresh rate is 30 frames/second, the number of cascade points is not less than 1024 points.
7. The data transmission speed is up to 800Kbps. Good light color consistency and high cost performance.

Product Details:

Applications:
The ws2815 product is designed to add a dreamy touch to spaces that require linear light sources. The product is widely used in holiday light shows, clothing, game consoles, e-sports equipment, computer cases, and TV backgrounds. In addition, it is also suitable for clothing, automotive, architectural lighting, sign lighting, cabinet and shelf lighting, as well as decorative lighting for stages, home theaters, wine cellars, cars, bicycles, yachts, and cruise ships.
Control method
The ws2815 product can achieve different effects through mini three-button controllers, RF controllers, Bluetooth controllers, music controllers, programmable controllers, WIFI controllers, DMX consoles, Madix, Aduino, EPS32/ESP8826, Raspberry Pi, etc.: static, static changes, water chasing, colorful changes, colorful chasing, animation, etc.